Creation diary 💜 Assemble the display case!

芝麻貓
·
·
IPFS
·
This work is my biggest work so far, and the time and material costs are also among the best. After finishing it, I may be able to retire... (No 🤣)

It was raining and raining for several days in a row, so I was really lazy to go out, but today I seemed a little lazy and didn’t want to work hard, so I decided to take an umbrella to go for a walk and eat, and by the way, I picked up the parts that had been delivered to the supermarket.

Since I don't want to work hard today, I'll change my taste. I've been inking and coloring a few days ago, so let's do woodworking today!

Today, I am going to install these three wooden boards into a display cabinet. I don’t know if it will be successful. The display cabinet is part of my work. It should be successful! ?

Unpack the package, assign the position of the fixing pieces, and use a ruler to calculate the distance between the locking pieces, and then use my right-hand man ~ Vickers electric grinder to drill the screw holes. I really appreciate it for helping me complete many works 💕 I want to buy a wire recently. Saw machine, but so expensive ~ struggling 😖😖

Four locking tabs are locked at the connection of each board, and one locking tab is locked on each side. This should be fairly stable, right? Because I will move back to the north later, and I will also move the work to the small suite that I will live in in July, and considering the shipping for the competition, this work is made into an assembled type, although the parts are locked a lot. , it is really troublesome to dismantle the group.

After locking the parts, carefully lift the wooden cabinet from the table, and plan to put it on the ground to see if it can stand. Because the front does not want to expose the parts, only the sides and back are locked, so it feels a little less stable. , I am really afraid that he will disintegrate.

I worked hard to move carefully, the weight of the three planks locked together made me almost think I was training hard... I have never lifted such heavy equipment in the gym before... 😵‍💫

Great…! I didn't expect that it would be quite stable to stand up, and the seams would not be too obvious. It can also be supported by placing 9 LEGO positioning pieces. It's great that it didn't collapse! ! ☺️

The front looks a little monotonous, so I still want to add accessories to decorate it, and I have to order materials again, but don't worry, because the cart must be completed next, and the color of the following components can be determined before deciding the color of the cabinet, although Looking forward to getting it done quickly, but it still has to be done step by step.

This cabinet alone is already taller than me, it is estimated to be 165 cm to 170 cm! Coupled with the following components, the last measurement of the entire work is estimated to be 240 cm. It is my largest work so far. The time and material costs are also among the best. After finishing it, I may be able to retire... (No 🤣)




CC BY-NC-ND 2.0

Like my work? Don't forget to support and clap, let me know that you are with me on the road of creation. Keep this enthusiasm together!

芝麻貓🤍插畫.日常.分享🤍這邊是放鬆的療癒系小天地🤍 🍬你的打賞會化作我的動力🍬 🍬作品開放收藏 圍爐開放用LikeCoin 訂閱🍬 🍬歡迎留言私訊🍬
  • Author
  • More

[30年老房修繕日記]存款花光了,小資女親力親為Diy修繕更衣間

2024.10.1 開始 26歲的我也是一隻有殼的蝸牛了

兒童美術研究室🖼️超可愛的麻薯精靈💚