How to repair several common faults of electric ceramic stove

How to repair several common faults of electric ceramic stove

Today, when electrical appliances are widely used, the tools for cooking in the family have increased from induction cookers to electric ceramic cookers. The advantages of induction cookers are convenience, speed and simplicity. But there is an obvious disadvantage, that is, it can pick the pot, and generally only the pan can be heated. As long as the pot is slightly shaped, there will be a situation of not obeying. At this time, the electric pottery stove comes in handy. It heats up quickly and does not pick the pot. Many people like to use it. The electric ceramic stove is often used, and some faults will gradually appear, but these faults are not enough to make us discard the electric ceramic stove, so what should we do? At this time, it is necessary to repair the electric ceramic stove. The following are several common ways to repair the common faults of the electric ceramic stove.

1. It will not heat up after power on, only the indicator light is on

A common cause is a burnt nickel-chromium alloy wire. Open the disk and replace it with a new one. Generally, you can repair it yourself. However, if the inspection of the nickel-chromium alloy wire heating plate is normal, then look at the triac heating circuit, and there may be a problem with the open circuit of Q5. If the damage is minor, see if it can be repaired. If the damage is serious, and you are not good at repairing the more complicated circuit problems of the electric ceramic stove, you can ask professional personnel to check it.

After power on, beep to warn

If the electric ceramic stove is powered on, after the buzzer beeps, there is a place that displays "E2", that is the digital tube. This situation is usually caused by poor contact between the main board and the thermocouple. There are several reasons for this situation. The "MAIN" 2P socket is soldered or the solder joints have fallen off. It may also be the line between the thermocouple and the socket. A loose connection has occurred. In the case of repairing the electric ceramic stove, you can try to tighten the wire. The problem of "MAIN" 2P socket can be solved by repair welding.

The working principle of the electric ceramic stove is to convert electrical energy into heat energy, and then generate a certain amount of energy through the nickel-chromium alloy wire, and at the same time emit infrared rays, which is the reason for the redness inside the electric ceramic stove when we use it with electricity. After figuring out the principle, it will be helpful for us to repair the electric ceramic stove. Just follow the principle to find where the problem occurs, some basic problems

https://www.54454474.com

can be solved.